||Smart UPS RT On-Line
|Output Power Capacity
||10 kW / 10 kVA
|Other Output Voltages
||Double Conversion Online
|Electric Output Connections
||(6) IEC 320 C13 (Battery Backup)
(4) IEC 320 C19 (Battery Backup)
|COMMUNICATION & MANAGEMENT
|Interface Port (s)
||Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
||Multi-function LCD status and control console
|Typical Recharge Time
|BATTERIES & RUNTIME
|Runtime by Half Load
|Runtime by Full Load
||40 - 70 Hz (auto sensing)
|Electric Input Connections
||Hard Wire 3 wire (1PH+N+G)
Hard Wire 5-wire (3PH + N + G)
|Input Voltage range for main operations
||160 - 275V
|Input Voltage Adjustable range for mains operation
||100 - 275 (half load), 173 - 476 (half load)V
|Maximum Dimension H x W x D (mm)
||432 mm x 263 mm x 715 mm
|Shipping Dimension H x W x D (mm)
||461 mm x 600 mm x 1000 mm
||3 years repair or replace (excluding battery) and 2 year for battery
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Smart-UPS On-Line Features & Benefits
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides management of the UPS via a serial port.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Provides notification of changing utility power and UPS power conditions
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
apc ini termasuk apc murah.
SRT10KXLI, APC Smart-UPS On-Line,10 kW /10 kVA,Input 230V
- Brand: APC
- Product Code: APC Smart-UPS On-Line,10 kW /10 kVA,Input 230V
- Availability: In Stock
SRTRK2 FeaturesQuick installation The iBusway for Data Center solution uses bolted snap-fit han..
SRT192BP2 FeaturesHot-swappable batteries Ensures clean, uninterrupted power to protected equip..
APCRBC140 FeaturesUser-replaceable batteries Increases availability by allowing a trained user ..
apc smart-ups 10 kW /10 kVA,
apc smart-ups 230V